Panasonic KV-SL1066 M2 - Detailed Roller Cleaning Procedures

8.2.3 Cleaning the Rollers
Use the roller cleaning paper (KV-SS03) (page 8) to wipe dirt off from the surfaces of all rollers.
Notice
• Be careful not to damage any parts of the unit.
1. Open the double feed prevention roller cover (
).
1
2. Remove the double feed prevention roller.
• While pushing the latch ( ) to the right side as indicated by the arrow, remove the double feed
prevention roller (
) in the direction of the arrow. Then, pull out the left shaft (when facing it) from the
notch in the roller mount.
2
1
8.2.3 Cleaning the Rollers
49