14. Close the paper feed roller cover ( ) firmly.
Notice
• Make sure to close both sides of the paper feed roller cover until they click into place.
• After installing the paper feed roller, confirm that the paper feed roller can rotate in the feeding
direction.
15. Close the ADF door (page 20).
16. Turn on the unit's power (page 19).
17. Reset the After Replace Roller Counter in User Utility to 0.
• For details, refer to the User Utility help.
Note
• If misfeeding or double feeding occurs after cleaning or replacing the rollers, the rollers may not be
installed properly. Confirm the installation conditions again.
8.3 Replacing the Rollers
60
To Next Page
Loading...
