Features Summary
-71-
Code #10 (KX-FT78 only): Changing the
incoming message recording time
RECORDING TIME
VOX (default): Unlimited.
1 MIN: Up to 1 minute.
Code #11 (KX-FT78 only): Setting the
remote operation ID
REMOTE TAD ID
1. Follow steps 1–4 on page 69.
2. Enter any 3-digit number.
L The default code is “111”.
L Do not use 0 and 7.
3. Press {SET}.
4. Press {MENU}.
Code #13: Setting the dialling mode
DIALLING MODE
If you cannot dial, change this setting
depending on your telephone line service.
TONE (default): For tone dial service.
PULSE: For rotary pulse dial service.
FT74-78HK.book Page 71 Friday, June 28, 2002 9:45 AM
To Next Page
Loading...
