3.9 Conference Features
3.9.1 Three-party Conference
Description
During a two-party conversation, an extension user can add a third party to the conversation, thereby
establishing a three-party conference call.
Operation
Perform Three-party Conference using the following procedure:
For SIP phone:
• Operation of this feature depends on the type of SIP phone being used. For details, refer to manual for
your telephone.
• Operation for KX-HDV series is as follows:
1. Press [CONF] button during a conversation.
2. Dial the party you want to add to the conversation.
3. Press [CONF] button.
For SLT extension:
SLT cannot originate a three-party conference.
Three-party conference will be finished when the conference originator's extension operates as follows:
For SIP phone:
Going On-hook. (Remaining two-party conversation will be also finished)
3.9.2 Meet-me conference
Description
By calling a floating extension number set as a Conference Room, it is possible to perform a Meet-me
conference.
[Make a conference room]
Perform the following settings through Web Maintenance Console. It is possible to specify a maximum of 3
conference rooms.
• The name of the Meet-me conference room
• The Floating extension number of the Meet-me conference room
• The Access code of the Meet-me conference room
Operation
[Attend a conference room]
Access the Meet-me conference room using the following procedure. The Meet-me conference can
accommodate a maximum of 6 parties.
• Call the Floating extension number of the Meet-me conference room
• Enter the Access code of the Meet-me conference room after a confirmation tone is heard.
3.9 Conference Features
58 Feature Manual
To Next Page
Loading...
