Panasonic KX-NCP1000 - During a Conversation

3.3 Information about the Main Processing Card
3.3.1 IPCMPR Card
Function
The IPCMPR card is the preinstalled main processing card with built
-in ESVM card feature (2-channel). The
Virtual Cards
(trunk/extension) can be installed in Virtual Slots of the IPCMPR card and can be activated with
the activation keys. Also, the IPCMPR supports LAN connection so that IP telephones (IP-PTs, IP softphones,
SIP Extensions) and PCs can be connected on a private IP network.
Mountable Cards
• One of the DSP4, DSP16, or DSP64 cards (refer to "3.3.2 DSP4 Card (KX-NCP1104), DSP16 Card
(KX-TDE0110), and DSP64 Card (KX-TDE0111)")
• RMT card (refer to "3.3.3 RMT Card (KX-TDA0196)")
2
4
1
5
3
SD Memory
Card
LEDs
SD Memory Card
Slot Cover
Reset Button
LAN Port
MNT Port
BGM/MOH
Pager
MPR ID Number
MNT Port LAN Port
To LAN
To PC
LEDs
System Initialise
Switch
Note
• Make sure to use the MNT port for PC connection, and the LAN port for LAN connection.
• The maximum length of the cable to be connected to the IPCMPR card is 100 m.
• When connecting the RJ45 connector, attach the ferrite core included with the PBX. Refer to
"3.2.6 Attaching a Ferrite Core".
• For details about Virtual Slots, refer to "1.3.3 System Capacity".
• For details about the activation keys, refer to "2.1 Information about the Activation Keys".
Installation Manual 59
3.3.1 IPCMPR Card