Panasonic KX-NCP1000 - T1 Card (KX-NCP1187)

3.5.2 T1 Card (KX-NCP1187)
Function
1-port T1 trunk card. EIA/TIA standard compliant.
BA
RJ45LEDs
To NT1/Extension
Accessories and User-supplied Items
Accessories (included): none
User-supplied (not included): RJ45 connector
CAUTION
• When connecting this optional service card to the trunk, connect through NT1; do not connect to the
trunk directly.
• T1 ports are SELV ports and should only be connected to SELV services.
Note
• This optional service card can be used for either trunk or extension connection, by setting the A/B
switch or using the connector with appropriate pin assignments.
• To confirm the trunk connection, refer to "Confirming the Trunk Connection" in "3.13.1 Starting the
PBX".
Switch Settings
Switch Type Usage and Status Definition
A/B Slide Select A (default) for trunk or B for extension use.
68 Installation Manual
3.5.2 T1 Card (KX-NCP1187)