Panasonic KX-NCP1000 - PRI30 Card (KX-NCP1290 CE;KX-NCP1290 CJ;KX-NCP1290 CN)

3.5.5 PRI30 Card (KX-NCP1290CE/KX-NCP1290CJ/
KX-NCP1290CN)
Function
1-port ISDN Primary Rate Interface card (30B channels). EURO-ISDN/ETSI compliant.
LEDs
RJ45
B
A
To NT1/ Extension
Accessories and User-supplied Items
Accessories (included): Ferrite core ´ 1
User-supplied (not included): RJ45 connector
CAUTION
• When connecting this optional service card to the trunk, connect through an NT1; do not connect to
the U interface of the trunk directly.
• PRI ports are SELV ports and should only be connected to SELV services.
Notice
When connecting the RJ45 connector, attach the included ferrite core. Refer to "3.2.6 Attaching a Ferrite
Core".
Note
• In some countries/areas, this optional service card must not be connected to the Public Switched
Telephone Network.
• This optional service card can be used for either trunk or extension connection, by setting the A/B
switch or using the connector with appropriate pin assignments.
• To confirm the trunk connection, refer to "Confirming the Trunk Connection" in "3.13.1 Starting the
PBX".
Switch Settings
Switch Type Usage and Status Definition
A/B Slide Select A (default) for trunk or B for extension use.
Installation Manual 77
3.5.5 PRI30 Card (KX-NCP1290CE/KX-NCP1290CJ/KX-NCP1290CN)