To make/answer a conference group call (for both extension and CO line)
Off-hook.
PT/SLT/PS
Dial conference
group number
(1 digit).
Enter 32.
Wait for an
answer.
conference
group no.
3 2
C.Tone
Any Telephone
Caller
The telephone
rings.
Off-hook.
Called Party
Enter entry code
(max. 8 digits).
entry code
*
Enter #.
Announce.
• *
If you do not enter an entry code when making the conference group call, extensions/outside
telephones can join the conversation without needing to enter an entry code.
• Entry codes can consist of the digits "0" through "9". When "
"
is used for an entry code, no
one can join a conversation that is already in progress. For details, refer to "
Join After
Time Out".
• With PTs and KX-TCA185/KX-TCA285/KX-TCA385/KX-WT125/KX-WT126 PSs, a
conference group call can be automatically answered without going off
-hook. This mode is
selected through system programming.
• If using an SLT, the caller can only originate a conference group call and cannot control the
called parties’ call status manually.
For a caller
To make a conversation with a specific party
PT/PS
(DSS)
Press DSS.
During an announcement
Document Version 2013-05 Operating Manual 63
1.3.17 Conference Group Call
To Next Page
Loading...
