To make a conversation with a party in the group’s preassigned order
PT/PS
Press CONF.
During an announcement
CONF
To end a conversation with a specific party
PT/PS
To end a conversation with a specific party
During a conversation
(DSS)
Press DSS.
To end a conversation with the party who
joined the conversation last
Press TRANSFER.
To disconnect the party who joined the
conversation last from the conference group call
Press FLASH/RECALL.
TRANSFE R
FLASH/
RECALL
• In this case, the FLASH/RECALL button must be set to Flash/Recall mode through system
programming.
64 Operating Manual Document Version 2013-05
1.3.17 Conference Group Call
To Next Page
Loading...
