3.
a. From the system menu, click System.
b. Click Numbering Plan.
c. Click Main.
d. Click the Other PBX Extension tab.
e. In the Other PBX Extension Numbering (TIE) box,
type a starting digit of destination extension.
f. Click OK.
4.
a. From the system menu, click Private Network.
b. Click TIE Table.
c. In the Leading Number box, type the starting digit
of destination extension.
d. Click OK.
5.
a. From the system menu, click Configuration.
b. Click Slot.
c. Move the mouse pointer over the installed
V-IPGW16 card to display the menu of options.
d. Click Ous.
You will see a confirmation message.
e. Click Yes.
f. Move the mouse pointer over the installed
V-IPGW16 card to display the menu of options.
g. Click Shelf Property.
6.
a. Click the Outgoing Call tab.
b. Select the preferred En-bloc Dialing setting
(Overlap (default) or En-bloc
*1
).
c. Click OK.
Document Version 2010-08 IP Networking Guide 45
4.2.3 Programming the Network Settings
To Next Page
Loading...
