KX-NT265
IP Address*
1
Subnet Mask Address*
2
Default Gateway Address*
3
To set the IP address of the IP-PT
To set the subnet mask address
To set the default gateway address (if required)
To enter the IP address of the IP-EXT16 card (PBX IP Address)
To start programming
Supply power to the IP-PT.
Press PROGRAM
while "Searching" is displayed.
Press VOLUME to
select "Network".
Press SP-PHONE. Press VOLUME to
select "DHCP (Disable)".
Press SP-PHONE
twice.
Press SP-PHONE.
Press VOLUME to
select "Subnet Mask".
Press SP-PHONE. Press SP-PHONE.
Press VOLUME to
select "Default GW".
Press SP-PHONE. Press SP-PHONE.
Press HOLD
twice to return
to the Menu screen.
HOLD
Press VOLUME
to select "PBX".
Press SP-PHONE
twice.
Press
SP-PHONE.
To the VLAN settings
To end programming
To set VLAN parameters
OR
Press STORE.
PBX IP
Address
Press HOLD
to return to the
Menu screen.
HOLD
The IP-PT will reboot
and can then be
registered to the PBX.
*1
Valid IP address range: "1.0.0.0" to "223.255.255.255"
*2
Valid subnet mask address range: "0–255.0–255.0–255.0–255" (except 0.0.0.0 and 255.255.255.255)
*3
Valid IP address range: "1.0.0.0" to "223.255.255.255"
72 IP Networking Guide Document Version 2010-08
4.5.1 Assigning the IP Addressing Information
To Next Page
Loading...
