Panasonic KX-NCP500 - Page 73

For KX-HGT100 SIP Telephones
1. Using a DHCP server to automate the assignment of IP addressing information
The DHCP server automatically assigns the IP address of the KX-HGT100, the subnet mask address, and
the default gateway address to the KX-HGT100.
The PBX IP address can be assigned to the KX-HGT100 through Web Programming. For details, refer to
"4.6.1 Registering IP Telephones".
Follow the procedure below to assign IP addressing information automatically.
To set the IP address of the KX-HGT100
To start programming
Supply power to the KX-HGT100.
Press PROGRAM.
Select "Set network". Press OK. Select "DHCP". Press OK.
To end programming
Press PROGRAM .
C. Tone
2.
Not using a DHCP server when assigning IP addressing information
The IP address of the KX-HGT100, the subnet mask address, and the default gateway address must be
assigned manually.
The PBX IP address can be assigned to the KX-HGT100 through Web Programming. For details, refer to
"4.6.1 Registering IP Telephones".
Document Version 2010-08 IP Networking Guide 73
4.5.1 Assigning the IP Addressing Information