Panasonic KX-NCP500 - Page 74

Follow the procedure below to assign IP addressing information manually.
To set the IP addressing information
To start programming
Supply power to the KX-HGT100.
Select "Set network". Press OK. Select "STATIC". Press OK.
To end programming
Press PROGRAM .
IP Address*
1
Press OK. Press OK.
Subnet Mask Address*
2
Default Gateway Address*
3
Press OK.
Press PROGRAM.
C. Tone
*1
Valid IP address range: "1.0.0.0" to "223.255.255.255"
*2
Valid subnet mask address range: "0–255.0–255.0–255.0–255" (except 0.0.0.0 and 255.255.255.255)
*3
Valid IP address range: "1.0.0.0" to "223.255.255.255"
74 IP Networking Guide Document Version 2010-08
4.5.1 Assigning the IP Addressing Information