3. Set passwords for the SIP Extensions.
a. Click the cell in the Connection column for each
SIP Extension you wish to register. The
Command Connection screen appears.
b. Click OUS.
c. Enter a password in the Password box for each
SIP Extension.
d. Click Apply.
e. Click the cell in the Connection column for each
SIP Extension to which a password has been
assigned. The Command Connection screen
appears.
f. Click INS.
g. Click OK.
Note
Alternatively, it is possible to set an extension
number as a password for each SIP Extension
automatically.
• In order to set the password automatically, do the
following in substitution for step c of the procedure
above.
a. Click Copy to. A screen will appear with
information on assigned extension numbers
for SIP Extensions.
b. Click Select All.
c. Click Execute to copy each Extension
Number to Password.
d. Click Yes.
e. Click OK to return to the Port Property screen.
Document Version 2010-08 IP Networking Guide 91
4.6.1 Registering IP Telephones
To Next Page
Loading...
