Panasonic KX-NCP500 - 1.6 Before Leaving Your Desk

6.
a. Click the Connections tab.
b. Select Never dial a connection if necessary.
c. Click LAN Settings.
7. When Not Using a Proxy Server
Note
If you will use a proxy server, see When Using a
Proxy Server.
a. Clear all check boxes.
b. Click OK.
Your PC is now ready for programming through direct
access to the KX-HGT100.
When Using a Proxy Server
If the network has a proxy server installed, you must apply the appropriate proxy settings to your PC. In this
case, follow the steps below instead of step 7 above:
7.
a. Check all boxes for Proxy server.
b. Click Advanced.
94 IP Networking Guide Document Version 2010-08
4.6.1 Registering IP Telephones