2.
a. Double-click Network Connections.
b. Double-click Local Area Connection.
c. Click Properties.
d. Confirm that Internet Protocol (TCP/IP) is listed.
Note
If Internet Protocol (TCP/IP) is not listed, you
must install TCP/IP. For details about
installation, refer to the documentation for
Windows XP.
3. Select Internet Protocol (TCP/IP) and click
Properties.
4.
a. Select Use the following IP address:.
b. In the IP address box, type 192.168.0.201.
This is an example entry. Type an IP address
different from that assigned to the KX-HGT100 in
"4.5.1 Assigning the IP Addressing Information".
c. In the Subnet mask box, type 255.255.255.0.
d. Click OK.
Note
To obtain an IP address automatically, select
Obtain an IP address automatically.
5.
a. Start Internet Explorer from the Start menu.
b. Click Internet Options from the Tools menu.
Document Version 2010-08 IP Networking Guide 93
4.6.1 Registering IP Telephones
To Next Page
Loading...
