1.3.55 Private Network Features—COLP (Connected Line
Identification Presentation)
When receiving a call through a private network, you can present your preprogrammed telephone number to
the calling party.
You
can select the telephone number sent, either the number of the line used or the number assigned to your
extension.
If you select "Public", the calling/called party sees the number of the line used (subscriber’s number).
If you select "Your extension", they see the telephone number assigned on your extension.
To show either the number assigned to the CO line or your extension
Off-hook.
On-hook.
Enter 1 for public or 2
for your extension.
PT/SLT/PS/SIP Extn.
Public
Your extension
OR
1
2
Enter 7 2.
27
C.Tone
1.3.56 Private Network Features—COLR (Connected Line
Identification Restriction)
When receiving a call through a private network, you can select whether the caller can see your telephone
number or not.
To show/prevent
On-hook.Off-hook.
PT/SLT/PS/SIP Extn.
Show
Prevent
0
1
OR
07
Enter 7 0. Enter 0 to show
or 1 to prevent.
C.Tone
• You can change the mode by pressing a preset COLR button while on
-hook.
The COLR button light shows the current status as follows:
Off: shows your telephone number.
Red on: prevents your telephone number being displayed.
Customizing Your Phone
• 3.1.4 Customizing the Buttons
Create or edit a Connected Line Identification Restriction
(COLR) button.
118 Operating Manual Document Version 2013-05
1.3.56 Private Network Features—COLR (Connected Line Identification Restriction)
To Next Page
Loading...
Need help?
General
