To set the timer for "No Answer" and "Busy/No Answer"
Off-hook.
Enter time
(seconds [2 digits]).
time
PT/SLT/PS/SIP Extn.
Enter 713.
On-hook.
1 3 7
C.Tone
Call Forwarding (FWD) for your Incoming Call Distribution Group
PT/SLT/PS/SIP Extn.
0
1
Set
Cancel
OR
Enter 1 to set
or 0 to cancel.
Enter ICD Group
extension number.
ICD Group
extension no.
Off-hook.
5
6
4
Both Calls
Intercom Calls
Outside Calls
OR
OR
Enter 71.
17
Enter 4 to 6 as
you desire.
Enter #.
On-hook.
Enter destination extension number.
Or enter CO line access number
and then outside phone number.
OR
destination
extension no.
(Max. 32 digits)
outside
phone no.
CO line
access no.
C.Tone
ICD Group: Incoming Call Distribution Group
For "Cancel", go on-hook
directly after entering ICD
Group extension number.
Document Version 2013-05 Operating Manual 85
1.3.30 FWD (Call Forwarding)
To Next Page
Loading...
