1.1.2 Password Security
To maintain system security, system passwords are required to access certain programming functions of the
PBX. By giving different users access to different passwords, it is possible to control the amount of
programming that each user is able to perform.
The following types of system passwords are available:
Password Description Format
System Password (PT) for
User
Used to access user-level PT programming. The specific PT
programming items that may be programmed at user level
can be selected through system programming.
4–10 digits
System Password (PT) for
Administrator
Used to access administrator-level PT programming. All PT
programming settings are available.
CAUTION
To the Administrator or Installer regarding the system password
1. Please provide all system passwords to the customer.
2. To
avoid unauthorised access and possible abuse of the PBX, keep the passwords secret, and inform
the customer of the importance of the passwords, and the possible dangers if they become known to
others.
3. The PBX has default passwords preset. For security, change these passwords the first time that you
programme the PBX.
4. Change the passwords periodically.
5. It is strongly recommended that passwords of 10 numbers or characters be used for maximum
protection against unauthorised access. For a list of numbers and characters that can be used in system
passwords, refer to Section 1.1.3 Entering Characters.
PT Programming Manual 11
1.1.2 Password Security
To Next Page
Loading...
Need help?
General
