To Next PageTo Next Page
What if my Panasonic Telephone doesn't have a feature button?
If your telephone model doesn't have a feature button, you can either change a flexible button to the desired button or enter the specified feature number instead of using the feature button.
What to do if my Panasonic KX-NS PBX does not operate properly?
To resolve the issue of your Panasonic PBX not operating properly, restart the PBX. Turn off the power switch, and then turn it back on. Alternatively, turn off the power switch, and then unplug the PBX. After 5 minutes, plug the PBX back in, and turn the power switch back on.
Why isn't my Panasonic Telephone working even after following instructions?
If you're following the manual instructions but none of the operations work when using a proprietary Panasonic Telephone, ensure that the Intercom line was seized. Press the INTERCOM or PDN button after going off-hook and follow the instructions.
What does it mean when the STATUS indicator on the front of the Panasonic PBX cabinet turns red?
If the STATUS indicator on the front of the Panasonic PBX cabinet turns red, a major system error has occurred in the PBX. See the error log using Web Maintenance Console.
Why can't I set the IP address, subnet mask address, and PBX IP address to the IP-PT on my Panasonic PBX?
If you cannot set the IP address, subnet mask address, and PBX IP address to the IP-PT on your Panasonic PBX, it is likely because an unusable value is being set. Set an IP address within the valid range. IP address of the IP-PT/PBX: "1.0.0.0" to "223.255.255.255" Subnet mask address: "0–255.0–255.0–255.0–255" (except "0.0.0.0" and "255.255.255.255").
Why is external music distorted on my Panasonic KX-NS PBX?
If external music is distorted on your Panasonic PBX, it is likely due to an excessive input level from the external music source. Decrease the output level of the external music source by using the volume control on the music source.
Why is redialing not working on my Panasonic Telephone?
Redialing may not function if the dialed number was more than 32 digits.
Why does my Panasonic Telephone line disconnect while talking to an outside party?
If your line is disconnecting while talking to someone outside, it may be because the time limit has run out. Consult your dealer to extend the time limit, if necessary.
Why can't I make an outside call with One-touch Dialing or speed dial on my Panasonic Telephone?
If you cannot make an outside call using One-touch Dialing or speed dialing, a line access number might not be stored. A line access number is required for outside calls.
What to do if Panasonic Telephone does not respond when buttons are pressed?
If your telephone is not responding when you press the buttons, it is possible that the telephone is locked. In this case, you should unlock your telephone.
General| Category | PBX |
|---|---|
| VoIP Support | Yes |
| Analog Extensions | Yes |
| IP Extensions | Yes |
| SIP Trunks | Yes |
| VoIP Codecs | G.711, G.729, G.722 |
| Series | KX-NS |
| System Type | Hybrid |
| Maximum Trunks | Up to 64 |
| Digital Extensions | Yes |
| Mobility | Yes |
| Voice Mail | Yes |
| Call Center Features | Yes |
| Unified Communications | Yes |
| Network Protocols | TCP/IP, SIP, RTP |
| Power Supply | AC 100-240V, 50/60Hz |
| Operating Temperature | 0°C to 40°C |
