To Next Page
M
Mariah RamirezAug 27, 2025
How do I correct the date and time on my Panasonic Telephone?
- DDenise JonesAug 27, 2025
If the date and time are not correct, set the date and time by system programming. Consult your dealer.
How do I correct the date and time on my Panasonic Telephone?
If the date and time are not correct, set the date and time by system programming. Consult your dealer.
What to do if I forgot my Panasonic Telephone password?
If you forgot the password for your Panasonic Telephone, ask your manager to assist you.
Why isn't my Panasonic Telephone working even after following instructions?
If you're following the manual instructions but none of the operations work when using a proprietary Panasonic Telephone, ensure that the Intercom line was seized. Press the INTERCOM or PDN button after going off-hook and follow the instructions.
How to troubleshoot a Panasonic Telephone that doesn't work?
If your Panasonic Telephone does not work properly, confirm with your manager that your settings are correct. If the problem persists, consult your dealer.
What if my Panasonic Telephone doesn't have a feature button?
If your telephone model doesn't have a feature button, you can either change a flexible button to the desired button or enter the specified feature number instead of using the feature button.
Why paralleled single line telephones do not ring on my Panasonic system?
If paralleled single line telephones are not ringing, it is possible that 'No ring' is selected in the settings. To fix this, change the setting to ring.
Why can't I have a conversation using my Bluetooth headset with Panasonic Telephone?
If you cannot have a conversation using the Bluetooth headset, make sure that the headset is properly registered to the module. Also, ensure that the headset is properly charged according to the headset's manual. Remove the wired headset from the headset jack, as priority is given to the wired headset when both are connected.
How to improve the visibility of the display on my Panasonic Telephone?
If the visibility of the display is poor, you can change the Display contrast level.
What to do if I cannot register my Bluetooth headset on Panasonic Telephone?
If you cannot register, de-register, or confirm the ID of the Bluetooth headset, make sure that the module is properly installed in the IP-PT/DPT.
What to do if I hear a reorder tone or see 'Restricted' on my Panasonic Telephone?
If you are hearing a reorder tone or seeing a 'Restricted' message, it could be due to a few reasons. The telephone might be locked, so try unlocking it. It's also possible that toll restriction is activated, in which case you should consult your manager or dealer. Finally, an account code might be required.
General| Category | PBX |
|---|---|
| VoIP Support | Yes |
| Analog Extensions | Yes |
| IP Extensions | Yes |
| SIP Trunks | Yes |
| VoIP Codecs | G.711, G.729, G.722 |
| Series | KX-NS |
| System Type | Hybrid |
| Maximum Trunks | Up to 64 |
| Digital Extensions | Yes |
| Mobility | Yes |
| Voice Mail | Yes |
| Call Center Features | Yes |
| Unified Communications | Yes |
| Network Protocols | TCP/IP, SIP, RTP |
| Power Supply | AC 100-240V, 50/60Hz |
| Operating Temperature | 0°C to 40°C |
