To Next PageTo Next Page
How to fix a Panasonic Telephone that does not work properly?
If your telephone is not working properly, first confirm with your manager that your settings are correct. If the problem persists, consult your dealer.
What to do if Panasonic Telephone does not respond when buttons are pressed?
If your telephone is not responding when you press the buttons, it is possible that the telephone is locked. In this case, you should unlock your telephone.
Why can't I make an outside call with One-touch Dialing or speed dial on my Panasonic Telephone?
If you cannot make an outside call using One-touch Dialing or speed dialing, a line access number might not be stored. A line access number is required for outside calls.
Why does my Panasonic Telephone line disconnect while talking to an outside party?
If your line is disconnecting while talking to someone outside, it may be because the time limit has run out. Consult your dealer to extend the time limit, if necessary.
Why is redialing not working on my Panasonic Telephone?
Redialing may not function if the dialed number was more than 32 digits.
What to do if I cannot remember the feature numbers on my Panasonic Telephone?
If you cannot remember the feature numbers, and they have been changed from the default values, check if the new feature numbers are written in the table in "5.3.1 Feature Number Table". You can also ask your dealer to change the feature numbers for easier use.
How do I correct the date and time on my Panasonic Telephone?
If the date and time are not correct, set the date and time by system programming. Consult your dealer.
What to do if I forgot my Panasonic Telephone password?
If you forgot the password for your Panasonic Telephone, ask your manager to assist you.
What to do if I hear a reorder tone or see 'Restricted' on my Panasonic Telephone?
If you are hearing a reorder tone or seeing a 'Restricted' message, it could be due to a few reasons. The telephone might be locked, so try unlocking it. It's also possible that toll restriction is activated, in which case you should consult your manager or dealer. Finally, an account code might be required.
How to troubleshoot a Panasonic Telephone that doesn't work?
If your Panasonic Telephone does not work properly, confirm with your manager that your settings are correct. If the problem persists, consult your dealer.
General| Category | PBX |
|---|---|
| VoIP Support | Yes |
| Analog Extensions | Yes |
| IP Extensions | Yes |
| SIP Trunks | Yes |
| VoIP Codecs | G.711, G.729, G.722 |
| Series | KX-NS |
| System Type | Hybrid |
| Maximum Trunks | Up to 64 |
| Digital Extensions | Yes |
| Mobility | Yes |
| Voice Mail | Yes |
| Call Center Features | Yes |
| Unified Communications | Yes |
| Network Protocols | TCP/IP, SIP, RTP |
| Power Supply | AC 100-240V, 50/60Hz |
| Operating Temperature | 0°C to 40°C |
