Panasonic KX-NS1000 - 2.1.3.2 Ring Tone Pattern Selection

To end programming
Press "STORE".
STORE
The IP-PT will reboot
and can then be
registered to the PBX.
To enter the IP address of the Secondary PBX (optional for software version 2.00 or
later only)
PBX IP Address
Select "Secondary PBX".
ENTER ENTER
Continued from previous page
*1
Valid IP address range: "1.0.0.0" to "223.255.255.255
"
*2
Valid subnet mask address range: "0–255.0–255.0–255.0–255" (except 0.0.0.0 and 255.255.255.255)
*3
Valid IP address range: "1.0.0.0" to "223.255.255.255"
44 Getting Started
4.3.1 Assigning IP Addressing Information