Panasonic KX-NS300 - Page 29

3. In the Numbering settings:
a. In Feature Number, select the appropriate option.
b. In CO Access/Operator Number, select the
appropriate options.
c. Select one of the following options for Select the
default value of numbering plan:
– 3 digits Extension Number
– 4 digits Extension Number
d. Click Next.
Note
Depending on the value selected above, the
numbering plan of the PBX will vary as follows.
Select this value with care.
4. In the Manager/Operator settings:
a. Select an extension number for the manager from
the drop-down list.
b. Select an extension number for the operator from the
drop-down list.
c. Click Next.
5. In the Trunk settings:
a. In CO Dialing Mode, select the appropriate option.
b. In Selection for PRI30/E1, select the appropriate
option.
c. Select an option for Incoming Call Distribution
Group. You can select "Yes" or "No". Refer to the
information on this screen for details.
d. Click Next.
Getting Started 29
4.1.1 Easy Setup Wizard