To Next PageTo Next Page
Why some features do not work on my Panasonic Telephone?
Some features might not work on your Panasonic Telephone because the system management may restrict certain features. In this case, you should consult your manager. Also, the feature numbers may have changed, so confirm the revised number and try again.
What to do if Panasonic Telephone does not respond when buttons are pressed?
If your Panasonic Telephone does not respond when buttons are pressed, it might be locked. You should unlock your telephone.
Why can't I make or receive calls via IP network on my Panasonic KX-NS300 PBX?
If you are unable to make or receive calls via an IP network using your Panasonic PBX, there are several potential causes: * A malfunctioning DSP card: Replace the card. * A malfunctioning motherboard: Replace the motherboard, ensuring the PBX is turned off during replacement. * Insufficient activation keys: Purchase additional activation key codes from a certified dealer. * Poor connection: Ensure an 8-pin twisted pair cable is used, CAT 5/CAT 5e cables are not over 100m, and a straight cable connects to a switching hub. * Network malfunction: Verify all network devices are on and there's no unwanted firewall interference.
How to correct the date and time that are not correct on my Panasonic Telephone?
If the date and time are not correct on your Panasonic Telephone, set the date and time by system programming. Consult your dealer.
What to do if I forgot the password for my Panasonic Telephone?
If you forgot the password for your Panasonic Telephone, ask your manager to assist you.
What to do if I cannot remember the feature numbers on my Panasonic Telephone?
If you cannot remember the feature numbers on your Panasonic Telephone, it may be because they have been changed from the default values. In that case, ask your dealer to change the feature numbers for easier use.
How to fix Panasonic Telephone that does not work properly?
If your Panasonic Telephone is not working properly, first confirm with your manager that your settings are correct. If the problem persists, consult your dealer.
What to do if IP-PTs/SIP phones do not operate on my Panasonic KX-NS300?
If your IP-PTs/SIP phones are not operating with your Panasonic PBX, it could be due to several reasons: * A malfunctioning DSP card: Replace the card. * A malfunctioning motherboard: Replace the motherboard after turning off the PBX. * Insufficient activation keys: Purchase additional activation key codes from a certified dealer. * The IP-PT/SIP phone is not registered: Register the phone. * The IP-PT/SIP phone malfunction: Replace the phone. * Poor connection: Ensure an 8-pin twisted pair cable is used, CAT 5/CAT 5e cables are not longer than 100m, and a straight cable is used for connection to a switching hub. * Network malfunction: Ensure all network devices are on and the IP-PT/SIP phone isn't blocked by a firewall or other network devices.
Why the parallelled single line Panasonic Telephones do not ring?
If the parallelled single line Panasonic Telephones do not ring, it may be because "No ring" is selected. Change the setting to ring.
General| System Type | Hybrid IP-PBX |
|---|---|
| Built-in Analog Extensions | 2 |
| Power Supply | AC 100-240 V, 50/60 Hz |
| IP Terminals Supported | Yes |
| Analog Terminals Supported | Yes |
| Digital Terminals Supported | Yes |
| Built-in Voicemail | Yes |
| Built-in Conference Bridge | Yes |
| Dimensions | 430 mm x 88 mm x 367 mm |
| Networking | SIP, H.323 |
| Built-in VoIP Channels | None (Requires optional DSP card) |
