Panasonic KX-NS500 - Page 344

Message Client
Item Description
Message Client Display
Language
Specifies the language of information generated by the UM system for the
mail (IMAP) client.
Changing Forward/Do Not Disturb Setting
You can change your extension’s Forward/Do Not Disturb settings for outside and intercom calls in the
Telephony Feature
tab of the Edit User screen.
1. In the Telephony Feature tab, set Forward/Do Not
Disturb as follows:
• For Outside Calls:
To specify the forward type, select the desired type
from the For external calls drop-down list, then
enter the telephone number or select Phone
(Home)
*1
or Phone (Mobile)
*1
to specify the forward
destination.
• For Intercom Calls:
To specify the forward type, select the desired type
from the For internal calls drop-down list, then
enter the telephone number or select Phone
(Home)
*1
or Phone (Mobile)
*1
to specify the forward
destination.
*1
These phone numbers are set in the Contact tab of the Edit
User screen.
Note
To apply
settings to both outside and intercom calls,
click For both internal calls and external calls.
When you select this, the setting of For external
calls is applied to both outside and intercom calls.
2. Click OK.
Storing names and numbers in personal speed dialling
You can set frequently dialled numbers using two-digit speed dialling numbers
(00–99). A maximum of 100
Personal Speed Dialling numbers can be programmed at your extension for your personal use.
1. In the Telephony Feature tab, click Speed Dialling
View/Edit.
2. The available speed dialling numbers are shown in sets
of 20. Select the desired set from Index.
3. Enter the name of the Personal Speed Dialling number
to call in Speed Dialling
- Personal Name
(max. 20
characters).
4. Enter the number to be dialled by the Personal Speed
Dialling number
in Speed Dialling - Personal Number
(max. 32 digits consisting of 0–9,
, #, T [Transfer], [ ]
[Secret], P [Pause], and F [Flash]).
344 User Manual
3.2.1 User Programming