Panasonic KX-TAW848 - Call Waiting; Executive Busy Override Deny

1.7 Extension Settings
User Manual 77
1.7.3 Call Waiting
During a conversation, you can be informed of a call waiting with a tone through your built-in speaker or
handset. (Default: Enable—Tone)
Call Waiting Tone:
a waiting tone through the built-in speaker of PT/handset of SLT. To change the tone from PT, refer to
"3.1.2 Settings on the Programming Mode".
To set/cancel for intercom calls
To set/cancel for outside calls
1.7.4 Executive Busy Override Deny
• Some extensions may be prohibited from performing this feature.
Off-hook. Enter 0 or 1 . On-hook.Enter 731 .
PT/SLT/PS
No tone
Tone
0
1
3 17
C.Tone
OR
Off-hook.
Enter
0 or 1 .
On-hook.
PT/SLT/PS
No tone
Tone
0
1
OR
Enter 732 .
3 27
C.Tone
OR
Off-hook.
On-hook.
Enter 1 to prevent
or
0 to allow.
PT/SLT/PS
Prevent
Allow
1
0
Enter 733 .
3 37
C.Tone
OR