3.1 Personal Programming
120 User Manual
3.1.3 Customizing the Buttons
You can change the flexible CO buttons/DSS buttons, and programmable feature (PF) buttons on PTs, DSS
Consoles, Add-on Key Modules, and PSs to the following function buttons. For example, if your telephone
has more CO buttons than available CO lines, you may change unused CO buttons to one-touch buttons.
• To enter the programming mode when using a PS, refer to "Operating Instructions" for PS.
Buttons
Programmable
Button
Programming Input
CO DSS PF
Loop-CO (L-CO)
Group-CO (G-CO)
+ CO line group no. (2 digits)
Single-CO (S-CO)
+ CO line no. (3 digits)
Direct Station Selection (DSS)
+ Extension no.
One-touch Dialing*
1
+ Desired no. (max. 32 digits)
Group Directory Number (G-DN)
+ Incoming call distribution group
extension no.
Message
Message for Another Extension
+ Extension no./Incoming call
distribution group extension no.
Call Forwarding (FWD)/Do Not
Disturb (DND)—Both calls
FWD/DND—Outside calls
FWD/DND—Intercom calls
Press
PROGRAM
or
PAUSE
.
Press
PROGRAM
or
PAUSE
.
Press
CO
,
DSS
or
PF
.
To exit
To program
To enter the program mode
Follow
programming
input
.
To continue
(CO, DSS, PF)
programming
input
Press
STORE
.
OR
OR
#
0
1
2
*
²
3 0
4 0
4 0
4 1
4 2
4 3
To Next Page
Loading...
