Storing an Item in the Handset Phonebook
Storing a New Item
1. Press
or the [CENTRE] navigation key.
2. Select "New Phonebook" by pressing the arrow keys, and then press .
3. Enter a name (max. 24 characters), and then press
.
4. Press [ ] or [ ] to select a phone number type (A to E), and then press .
5. Enter the phone number (max. 32 digits), and then press .
6. Repeat steps 4 and 5 to add additional phone number types.
7. Press [
] or [ ] to select "Category Off", and then press .
8. Select a category, and then press
.
9. To select a default number for the entry, press [ ] or [ ] to select "Default TEL No", and then press
.
10.Press [ ] or [ ] to select the number to use as the default number, and then press .
11.Press .
Note
R Steps 7 and 8 can be omitted if you do not want to assign a category.
R Steps 9 and 10 can be omitted if you do not want to assign a default number. (The first number
entered for an entry will automatically be assigned as the default number.)
R The valid digits are "0" through "9", " ", " ", "P ( )".
R If an item with the same name and number exists, the new information added will be merged with the
existing item.
R To enter characters, see Page 58.
Editing a Stored Item
1. Press .
2. Enter a name.
*1
3. Press .
4. Press [ ] or [ ] to select the desired item, if required.
5. Press to open the phonebook sub-menu.
6. Press [
] or [ ] to select "Edit", and then press .
7. Edit the name, phone number, category, and default number setting as necessary.
8. Press
.
*1 This step can be omitted.
Note
R To change a character or digit, press [
] or [ ] to highlight it, press to delete it, and then enter
the new character or digit.
R To clear an entire line, press and hold for more than 1 second.
R To move the cursor to the left or right, press [ ] or [ ], respectively.
R To search for an item in the phonebook, see Page 51.
R To enter characters, see Page 58.
47
Using the Handset Phonebook
To Next Page
Loading...
