Charger Connection
Connect the AC adaptor to the charger.
KX-TCA185
KX-TCA285
KX-TCA385
R The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet. Do not
connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor may cause it to
become disconnected.
R Fasten the AC adaptor cord to the cord holder.
R Use only the included Panasonic AC adaptor. For details, see "Included Accessory" on Page 14 or
later.
WARNING
R To reduce the risk of fire or electric shock, do not overload AC outlets and extension cords.
R Do not bundle the charger’s AC adaptor cord with the power cords of machines located nearby.
R Completely insert the AC adaptor/power plug into the AC outlet. Failure to do so may cause electric
shock and/or excessive heat resulting in a fire.
R Regularly remove any dust, etc. from the AC adaptor/power plug by pulling it from the power outlet,
then wiping with a dry cloth. Accumulated dust may cause an insulation defect from moisture, etc.
resulting in a fire.
73
Installation and Setup
To Next Page
Loading...
