Panasonic KX-TDA0108

2.8 Connection of DECT Portable Stations
168 Installation Manual
Setting the Personal Identification Number (PIN) for PS Registration
To prevent registering the PS to a wrong Hybrid IP-PBX, a PIN for PS registration can be set to the Hybrid
IP-PBX. Before registering the PS to the Hybrid IP-PBX, register the PIN set to the Hybrid IP-PBX into the
PS. By doing so, the PS will only be registered to the Hybrid IP-PBX with the matching PIN.
Notes
• By default, the PIN for PS registration is "1234" for both the Hybrid IP-PBX and PS. Therefore, the
PS can be registered to the Hybrid IP-PBX without setting the PIN.
• The PIN for PS registration will only be used when registering the PS to the Hybrid IP-PBX.
Therefore, even when there is more than 1 Hybrid IP-PBX with the same PIN near the PS, the PS
will not be linked to a different Hybrid IP-PBX during normal operation after registration.
Setting the PIN for Hybrid IP-PBX
Changing the Display Language of the PS
Using the KX-TCA155/KX-TCA255
Using the KX-TD7590
Using the KX-TD7580
[692]
1 to 4 digits
PIN for PS Registration
END
ENTER ENTER
1234
Select
"Setting Handset".
Select
" Select Language ".
Select
"Display Option".
Select the desired
language
.
Press POWER
for 2 seconds.
/
Select
"DISPLAY SETTING".
Select the desired
language.
Select
"LANGUAGE".
Press POWER
for 5 seconds.
F
/
/
SELECT
SELECT
SELECT
0
SELECT
/
Select
"Setting Handset".
Select "Select
Language".
Select
"Display Option".
Select the desired
language.
Press POWER
for 2 seconds.
/
/
/