2.4 Installation of the Trunk Cards
Installation Manual 81
2.4.5 E&M8 Card
Function
8-port E & M (TIE) trunk card. Type 5 support.
Accessory and User-supplied Items
Accessory (included): Screws × 2
User-supplied (not included): Amphenol connector
Notes
• Connect this optional service card to the trunk through terminal board from the E & M (TIE) line;
do not connect to the trunk directly.
• To connect the Amphenol connector, refer to "2.2.10 Fastening Amphenol Type Connector".
• To confirm the trunk connection, refer to "Confirming the Trunk Connection" in "2.13.1 Starting the
Hybrid IP-PBX".
To terminal board from the E & M (TIE) line
LED
Amphenol
To Next Page
Loading...
