Panasonic KX-TDA100D

To clear the log information
Display PT
While confirming the log information
Press Call Log, or Up or Down
until desired party appears.
(Call Log)
OR
Press TRANSFER.
TRANSFER
To call
Off-hook.
While confirming the log information
Display PT
Press Call Log, or Up or Down
until desired party appears.
(Call Log)
OR
To store the caller’s information in personal speed dialling
Press STORE.
Display PT
AUTO DIAL
STORE
While confirming the log information
Press Call Log, or Up or Down
until desired party appears.
(Call Log)
OR
• The Call Log button light shows the current status as follows:
Off: No incoming call. Or you have already viewed the call log.
Red on: You have missed calls to view.
• If your call is answered by another extension, the caller
’s information is recorded on the
displays of both your extension and the answering extension.
• You can lock your call log display by using an extension PIN (Personal Identification Number),
so that you can prohibit access to your logged information (Display Lock). Refer to
"3.1.2 Settings on the Programming Mode".
• You can also have a Call Log button for an ICD Group (Incoming Call Distribution Group).
• If a call arrives while you are using the call log, the call log display will be replaced with the
caller’s information.
164 User Manual
1.13.1 Using the Call Log