Customising Your Phone
• 3.1.3 Customising the Buttons
Create or edit a Call Log button or Call Log for ICD Group button.
Calling with the Outgoing Call Log
You can redial using the outgoing call log.
To call
KX-NT300/KX-DT300/KX-T7600
Press Left.
Press Up or Down
until desired number
appears.
Off-hook.
While on-hook
To call with the REDIAL button
Display PT
Press REDIAL to
display the outgoing
call log.*
Press REDIAL
until desired number
appears.
Off-hook.
While on-hook
REDIAL
REDIAL
• * System programming is required for this operation.
• This operation is available only for digital proprietary telephones with a display.
To store the caller’s information in personal speed dialling
Press STORE.
When the desired party is displayed
Display PT
AUTO DIAL
STORE
• You
can lock your call log display by using an extension PIN (Personal Identification Number),
so that you can prohibit access to your logged information (Display Lock). Refer to
"3.1.2 Settings on the Programming Mode".
• If a call arrives while you are using the call log, the call log display will be replaced with the
caller’s information.
User Manual 165
1.13.1 Using the Call Log
To Next Page
Loading...
