Panasonic KX-TDA30

KX-NT265
PBX IP
Address
To enter the IP address of the IP-EXT card (PBX IP Address)
Press PROGRAM
while "Searching" is displayed.
To start programming
Supply power to the IP-PT.
PROG.
Press HOLD to return
to the Menu screen.
HOLD
Press VOLUME
to select "PBX".
VOL
Press SP-PHONE
twice.
Press SP-PHONE.
To the VLAN settings
The IP-PT will reboot
and establish connection
to the network.
To end programming
To set VLAN parameters
OR
Press STORE.
Press VOLUME to
select "Network".
To set the IP address of the IP-PT
VOL
Press SP-PHONE. Press VOLUME to
select "DHCP (Enable)".
VOL
Press HOLD to return
to the Menu screen.
HOLD
38 Information about IP Proprietary Telephones
4.2.1 Assigning the IP Addressing Information