To Next PageTo Next Page
How to fix a Panasonic IP Phone PBX that is not operating properly?
If the PBX does not operate properly, press the Reset Button. If that does not help, turn off the power switch, and then turn it back on. Alternatively, turn off the power switch, unplug the PBX for 5 minutes, plug it back in, and turn the power switch back on. If the error no. 41 is displayed in the error log, replace the IPCMEC card.
Why telephone does not work with personal settings on Panasonic PBX?
If your Panasonic PBX telephone does not work with personal settings, it could be because the extension line has been changed. Clear the settings and then program your desired settings again.
Why I cannot make an outside call using One-touch Dialing on Panasonic KX-TDE100?
If you cannot make an outside call using the One-touch Dialing button or speed dialing on your Panasonic PBX, it is possible that a line access number was not stored. A line access number is required for outside calls.
What if my Panasonic KX-TDE100 phone does not have a feature button?
If your Panasonic PBX proprietary telephone doesn't have a feature button, it might be because some models don't have one. You can change a flexible button to the desired button, or enter the specified feature number instead of using the feature button.
What if my Panasonic PBX phone doesn't have a feature button?
If your Panasonic PBX proprietary telephone does not have a feature button, it may be because some models do not include a dedicated feature button. You can change a flexible button to the desired button.
Why does my Panasonic PBX line disconnect during outside calls?
If, while talking to an outside party, the line is disconnected on your Panasonic PBX, the time limit may have run out. Consult your dealer to extend the time limit, if necessary.
Why are my extensions (except IP-PT/SIP Extension) not working on my Panasonic KX-TDE100 PBX?
If extensions (excluding IP-PT/SIP extensions) aren't functioning on your Panasonic PBX, the issue could stem from several sources. A malfunctioning extension card may be the cause, necessitating its replacement. Alternatively, a poor connection between the PBX and the extension could be the problem. To test this, plug the extension into the same port using a short cord; if it works, the original connection needs repair. Also, ensure that if you're using a telephone with an A-A1 relay, a 2-wire cord is used and the relay switch is in the 'OUT' or 'OFF' position. The extension itself might be faulty, so try plugging it into a working port; if it still fails, replace the extension. Lastly, confirm that the PSU is the correct type, replacing it if necessary.
What to do if I can't register the PS on my Panasonic KX-TDE100 PBX?
If you cannot register the PS on your Panasonic PBX, it may be due to a wrong Personal Identification Number (PIN) registered to the PS, or the CS is not connected properly. Enter the PIN set to the PBX into the PS. Make sure that the cable is connected properly with correct pin assignments. Also, make sure that the cable does not make short circuits. Switch all DIP switches off.
What to do if IP-PTs/SIP Extensions do not operate on Panasonic IP Phone?
If IP-PTs/SIP Extensions on your Panasonic IP Phone aren't working, first, make sure all network devices are on and the IP-PT/SIP Extension isn't blocked by a firewall. Verify that an 8-pin twisted pair cable is used for connection, CAT 5 cables are not longer than 100 m (328 ft), and a straight cable connects to the switching hub. Try registering the IP-PT/SIP Extension. If problems persist, the IP-EXT/DSP or IPCMPR card may need replacement. Also, check if you have enough activation keys and purchase more if necessary. As a last resort, replace the IP-PT/SIP Extension.
How do I register an IP-PT on my Panasonic IP Phone?
To register the IP-PT on your Panasonic IP Phone, when not using a DHCP server, set the IP address, subnet mask address, and enter the PBX IP address. If necessary, also enter the IP address of the default gateway. When using a DHCP server, enter the PBX IP address.
Details on supporting IP communication with various IP telephones and SIP extensions.
Information on using cellular phones as PBX extensions for making and receiving calls.
General safety guidelines to prevent danger and property damage during product use.
Specific considerations and limitations for users of SIP extensions.
Instructions for collecting and disposing of old equipment and batteries in the EU.
Initial setup and understanding telephone types and feature numbers.
Detailed procedures for initiating various types of calls.
Instructions on how to answer incoming calls and handle call waiting.
Managing calls during an active conversation, including transfer and hold.
Features for managing calls when away, like call forwarding.
Customizing telephone features such as alarms and DND.
Connecting and operating external devices like doorphones and relays.
Utilizing the call log and directories on display telephones.
Specific functions for IP proprietary telephones, including self-labelling.
Manager's capabilities to control and monitor other extensions.
Managing other extensions, including locking, unlocking, and status changes.
Manager's ability to change time-based service modes like Day/Night.
Personalizing telephone features and settings according to user needs.
Detailed configuration of system features and parameters via programming.
Assigning specific functions or numbers to flexible buttons for quick access.
Features available for managers to program call charges and control extensions.
Customizing system-wide settings like date, time, and speed dialling.
Common problems and solutions for telephone and PBX operation.
A table listing feature numbers and their corresponding digits or buttons.
Explanation of various audible tones used by the telephone system for feedback.
General