To Next PageTo Next Page
Why I cannot register Bluetooth headset on Panasonic PBX?
If you cannot register, de-register, or confirm the ID of the Bluetooth headset on your Panasonic PBX, make sure that the module is properly installed in the IP-PT.
Why redialing does not function on Panasonic KX-TDE100 PBX?
If redialing does not function on your Panasonic PBX, it could be because the stored number was more than 32 digits or an extension number.
Why is nothing audible when using the speakerphone on an APT Panasonic KX-TDE100?
If nothing is audible when using the speakerphone on an APT with your Panasonic PBX, check the HANDSET/ HEADSET selector. If it is set to the "HEADSET" position and you are not using a headset, set it to the "HANDSET" position.
What to do if Panasonic KX-TDE100 PBX does not operate properly?
If your Panasonic PBX isn't operating correctly, try these steps: First, press the Reset Button. If that doesn't work, turn the power switch off and then back on. As a further step, turn off the power switch, unplug the PBX, wait 5 minutes, plug it back in, and then turn the power switch back on.
What to do if Panasonic PBX extensions don't work during a power failure?
During a power failure, if extensions connected to ports 1 to 4 of MSLC16/SLC16 and ports 1 to 2 of DHLC8/SLC8 cards on your Panasonic PBX aren't working, it could be due to a DPT or APT being connected to the extension port. Disconnect the DPT or APT and connect an SLT instead. Additionally, the dialing mode (tone or pulse) might be incorrect, so set the Tone/Pulse switch to the other position.
How to fix a Panasonic KX-TDE100 PBX display that is not shown well?
If the display is not shown well on your Panasonic PBX, change the Display contrast level.
Why MESSAGE button light is on Panasonic KX-TDE100 PBX?
If the MESSAGE button light is lit on your Panasonic PBX, another extension left you a message waiting indication while you were on the phone or away from your desk.
Why SDN button does not work on Panasonic PBX?
If an SDN button on your extension does not work on your Panasonic PBX, a PDN button is not assigned on the extension corresponding to your SDN button. Create a PDN button on the desired extension.
Why does my Panasonic KX-TDE100 say restricted?
If you are hearing a reorder tone or seeing "Restricted" displayed on your Panasonic PBX phone, it could be due to a few reasons. First, check if your telephone is locked and unlock it if necessary. Another possibility is that toll restriction is activated, in which case you should consult your manager or dealer. Finally, an account code might be required, so refer to section 1.2.7 in the manual for instructions on calling without restrictions using an account code.
What to do if Panasonic KX-TDE100 PBX telephone does not respond?
If your Panasonic PBX telephone isn't responding when you press the buttons, it could be because the telephone is locked. Try unlocking your telephone. Another reason might be that your telephone is connected to an eXtra Device Port, which requires system programming. In this case, consult your dealer.
Details on supporting IP communication with various IP telephones and SIP extensions.
Information on using cellular phones as PBX extensions for making and receiving calls.
General safety guidelines to prevent danger and property damage during product use.
Specific considerations and limitations for users of SIP extensions.
Instructions for collecting and disposing of old equipment and batteries in the EU.
Initial setup and understanding telephone types and feature numbers.
Detailed procedures for initiating various types of calls.
Instructions on how to answer incoming calls and handle call waiting.
Managing calls during an active conversation, including transfer and hold.
Features for managing calls when away, like call forwarding.
Customizing telephone features such as alarms and DND.
Connecting and operating external devices like doorphones and relays.
Utilizing the call log and directories on display telephones.
Specific functions for IP proprietary telephones, including self-labelling.
Manager's capabilities to control and monitor other extensions.
Managing other extensions, including locking, unlocking, and status changes.
Manager's ability to change time-based service modes like Day/Night.
Personalizing telephone features and settings according to user needs.
Detailed configuration of system features and parameters via programming.
Assigning specific functions or numbers to flexible buttons for quick access.
Features available for managers to program call charges and control extensions.
Customizing system-wide settings like date, time, and speed dialling.
Common problems and solutions for telephone and PBX operation.
A table listing feature numbers and their corresponding digits or buttons.
Explanation of various audible tones used by the telephone system for feedback.
General