EasyManuals Logo

Panasonic KX-TDE200 Features Guide

Panasonic KX-TDE200
472 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #179 background imageLoading...
Page #179 background image
1.13 Holding Features
Feature Guide 179
1.13.2 Call Park
Description
An extension user can place a call into a common parking zone of the PBX. The Call Park feature can be
used as a transferring feature; this releases the user from the parked call to perform other operations. The
parked call can be retrieved by any extension user.
Conditions
• Automatic Call Park
It is possible to select an idle parking zone automatically.
• Retry
If the specified parking zone is occupied or there is no vacant zone for Automatic Call Park, the
originator will hear a busy tone. Retrying is possible while hearing the busy tone by selecting parking
zone or a vacant zone.
• Call Park Recall
If a parked call is not retrieved within a preprogrammed time period, Call Park Recall will be heard at
the Transfer Recall destination assigned to the extension which parked the call. If the destination is
engaged in a call, the Hold Alarm will be heard.
• If a parked trunk call is not retrieved within a preprogrammed time period (Default: 30 minutes), it is
automatically disconnected.
• Call Park Button
Pressing the Call Park button parks or retrieves a call in a preset parking zone.
A flexible button can be customised as the Call Park button. It shows the current status of the preset
parking zone as follows:
• Call Park (Automatic Park Zone) Button
Pressing the Call Park (Automatic Park Zone) button parks a call in an idle parking zone automatically.
A flexible button can be customised as the Call Park (Automatic Park Zone) button.
• Call Park Retrieve Deny
If an extension user cannot call certain extensions on a COS basis (→ 1.1.2.2 Internal Call Block), he
cannot retrieve the parked call which the extensions made.
Programming Manual References
PC Programming Manual
2.8.4 [2-3] Timers & Counters
→ Recall—Call Park Recall
→ Recall—Disconnect after Recall
2.8.8 [2-6-1] Numbering Plan—Main—Features—Call Park / Call Park Retrieve
2.10.5 [4-1-4] Wired Extension—Flexible Button
→ Typ e
→ Parameter Selection (for Call Park)
→ Optional Parameter (Ringing Tone Type Number) (for Call Park)
Light pattern Status
Slow red flashing Parked in the preset parking zone
Off No parked call

Table of Contents

Other manuals for Panasonic KX-TDE200

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Panasonic KX-TDE200 and is the answer not in the manual?

Panasonic KX-TDE200 Specifications

General IconGeneral
LED indicatorsYes
SIP extensions128
Number of extensions256
Number of DECT cell stations32
Weight and Dimensions IconWeight and Dimensions
Weight15966.5 g
Dimensions (WxDxH)424 x 276 x 439 mm

Related product manuals