1.21 Integrated Services Digital Network (ISDN) Service Features
266 Feature Guide
1.21.1.10 Completion of Calls to Busy Subscriber (CCBS)
Description
If the called party is busy and the call has been made using an ISDN line, an extension user can set to
receive callback ringing when the called party becomes free. When the user answers the callback ringing,
that party's number is automatically dialled.
Conditions
• This feature complies with the following European Telecommunication Standard (ETS) specification:
– ETS 300 359 Completion of Calls to Busy Subscriber (CCBS) supplementary service.
• This feature is available under the following conditions:
a) The caller's PBX is capable of using CCBS and the service is provided by the network.
b) The called party's PBX is capable of accepting CCBS.
• To receive and send CCBS, receiving and sending CCBS must be enabled individually on an ISDN port
basis through system programming.
• An extension user can set only one CCBS. The last setting is effective.
• The CCBS setting is cancelled if there is no callback ringing within 60 minutes or callback ringing is not
answered within 10 seconds.
• After using the CCBS feature, using Last Number Redial will not retrieve the number dialled by CCBS.
(→ 1.6.1.4 Last Number Redial)
• An extension user that has set the CCBS feature cannot receive callback ringing while the extension is
holding a call.
Programming Manual References
PC Programming Manual
2.7.14 [1-1] Slot—BRI Port—Supplementary Service
→ COLP, CLIR, COLR, CNIP, CONP, CNIR, CONR, CF (Rerouting), CT, CCBS, AOC-D, AOC-E,
3PTY
→ CCBS Option
2.7.16 [1-1] Slot—PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—Supplementary Service
→ COLP, CLIR, COLR, CNIP, CONP, CNIR, CONR, CF (Rerouting), CT, CCBS, AOC-D, AOC-E,
3PTY
→ CCBS Type
→ CCBS delete digits
PT Programming Manual
None
User Manual References
1.2.4 When the Dialled Line is Busy or There is No Answer
To Next Page
Loading...
Need help?
General
Weight and Dimensions
