Preparation
14
Date and time
Set the correct date and time.
– To use the available alarm function
(page 24).
– When you play back a message from
the answering system (page 27), the
unit announces the day and time it
was recorded.
1 {MENU}
2 {V}/{^}: “Set date & time” i
{OK}
3 {V}/{^}: “Date and time” i
{OK}
4 Enter the current month, day, and
year by selecting 2 digits for each.
Example: August 15, 2007
{0}{8} {1}{5} {0}{7}
5 Enter the current hour and minute
(12-hour clock format) by selecting 2
digits for each.
Example: 9:30
{0}{9} {3}{0}
6 Press {*} to select “AM” or “PM”.
7 {OK} i {OFF}
Note:
LWhen English is selected as the
display language, 12-hour clock
format is used. When French is
selected, 24-hour clock format is
used.
LIf you make a mistake when entering
the date and time, press {<}, {>},
{^}, or {V} to move the cursor, then
make the correction.
LThe date and time may be incorrect
after a power failure. In this case, set
the date and time again.
TG103xC.bookPage14Wednesday,February28,20075:25PM
To Next Page
Loading...
