Panasonic KX-TG1032C

Programming
23
*1 If you program these settings using one of the handsets, you do not need to
program the same item using another handset.
*2 If you subscribe to a distinctive ring service, select a tone (tone 1 to 5). If you
select a melody, you cannot distinguish lines by their ringers.
The preset melodies in this product are used with permission of © 2006
Copyrights Vision Inc.
*3 Turn this feature off if you prefer not to hear key tones while you are dialing or
pressing any keys, including confirmation tones and error tones.
*4 If you subscribe to Call Display service and want to view the caller’s information
after lifting up the handset to answer a call, turn off this feature.
*5 This feature allows the unit to automatically adjust the date and time setting when
caller information is received. To use this feature, set the date and time first.
Ph.book settings New entry –17
Copy all –19
Erase all –18
Handset settings Ringer settings Ringer volume
<Level 6>
–
Ringer tone
*2
<Tone 1>
–
Display settings Change language
<English>
13
Contrast <Level 3> –
Registration HS registration 34
Deregistration 34
Other settings Message alert
<Off>
31
32
Key tone
*3
<On>–
Auto talk
*4
<Off>16
Set date & time Date and time
*1
–14
Time adjustment
*1, *5
<Caller ID[auto]>
––
Set tel line Set dial mode
*1
<Tone>
–13
Set flash time
*1, *6
<700ms>
–16
Customer support ––24
Main menu Sub-menu 1 Sub-menu 2 Page
TG103xC.bookPage23Wednesday,February28,20075:25PM