Panasonic KX-TG1032C

Phonebook
18
Searching for a name by initial
1 {k}
2 Press the dial key ({0} – {9}) that
corresponds to the first letter you are
searching for (see the character
table, page 17).
Example: “LISA”
Press {5} repeatedly to display the
first phonebook entry starting with
the initial “L” and go to step 3.
LIf there is no item corresponding to
the letter you selected, the next
item is displayed.
3 Press {V} to select the desired item.
4 Press {C} to dial the phone
number.
Editing items in the
phonebook
1
Find the desired item (page 17). i
{MENU}
2 {V}/{^}: “Edit” i {OK}
3 Edit the name if necessary (see the
character table, page 17). i {OK}
4 Edit the phone number if necessary.
i {OK}
5 {V}/{^}: “Save” i {OK} i
{OFF}
Erasing items in the
phonebook
Erasing an item
1 Find the desired item (page 17).
2 {MENU}
3 {V}/{^}: “Erase” i {OK}
4 {V}/{^}: “Yes” i {OK} i {OFF}
Note:
LStep 2 variation:
Press {CLEAR}, then skip to step 4.
Erasing all items
1 {k}
2 {MENU}
3 {V}/{^}: “Erase all” i {OK}
4 {V}/{^}: “Yes” i {OK}
5 {V}/{^}: “Yes” i {OK} i {OFF}
Note:
LStep 2 variation:
Press {CLEAR}, then skip to step 4.
Chain dial
This feature allows you to dial phone
numbers in the handset phonebook
while you are on a call. This feature can
be used, for example, to dial a calling
card access number or bank account
PIN that you have stored in the handset
phonebook, without having to dial
manually.
1 During an outside call, press {k}.
2 Find the desired item (page 17). i
{OK}
Note:
LWhen storing a calling card access
number and your PIN in the
phonebook as one phonebook item,
press {PAUSE} to add pauses after
the number and PIN as necessary
(page 15).
LIf you have rotary/pulse service, you
need to press {*} before pressing
{k} in step 1 to change the dialing
mode temporarily to tone.
TG103xC.bookPage18Wednesday,February28,20075:25PM