Panasonic KX-TG1032C

Call Display Service
20
Using Call Display
service
This unit is Call Display compatible. To
use Call Display features, you must
subscribe to the Call Display service of
your telephone service provider.
Call Display features
When an outside call is being received,
the calling party’s name and phone
number are displayed.
Caller information for the last 50 callers
is logged in the caller list by the most
recent call to the oldest.
LGenerally caller information is
displayed from the 2nd ring.
LIf the unit cannot receive caller
information, the following is
displayed:
–“Unavailable Name & No.”:
The caller dialed from an area
which does not provide Call Display
service.
–“Private caller”: The caller
requested not to send caller
information.
–“Long distance”: The caller
called you long distance.
LIf the unit is connected to a PBX
system, caller information may not be
received properly. Consult your PBX
supplier.
Missed calls
If a call is not answered, the unit treats
the call as a missed call. The number of
missed calls is shown on the display.
This lets you know if you should view
the caller list to see who called while
you were out.
Custom name display
When the Call Display number is
received and it matches a phone
number stored in the phonebook, the
stored name from the phonebook is
displayed and logged in the caller list.
Visual Call Waiting service
If you subscribe to both Call Display and
Visual Call Waiting services, the 2nd
caller’s information is displayed after
you hear a Call Waiting tone (page 16).
Please contact your telephone service
provider for details and availability of
this service in your area.
Caller list
Viewing the caller list and
calling back
1
{MENU}
2 {V}/{^}: “View Caller ID” i
{OK}
3 Press {V} to search from the most
recent call, or {^} to search from the
oldest call.
4 To call back, press {C}.
To exit, press {OFF}.
Note:
LA Q is displayed in caller information
which has already been viewed or
answered.
Editing a caller’s phone
number before calling back
You can edit a phone number in the
caller list by adding the long distance
code “1” or removing its area code.
1 {MENU}
TG103xC.bookPage20Wednesday,February28,20075:25PM