Panasonic KX-TG1032C

Useful Information
35
Wall mounting (Base
unit only)
1 Lead the AC adaptor cord and
telephone line cord through the hole
in the wall mounting adaptor in the
direction of the arrow.
2 Tuck the telephone line cord inside
the wall mounting adaptor (A).
Connect the AC adaptor cord and
telephone line cord (B).
3 Insert the hooks on the wall
mounting adaptor into the holes 1
and 2 on the base unit.
4 Adjust the adaptor to hold the base
unit, then push it in the direction of
the arrow until it clicks into place.
Hook
AC adaptor cord
2
1
2
1
TG103xC.bookPage35Wednesday,February28,20075:25PM