Useful Information
41
Call Display
Problem Cause/solution
The handset does not
display the caller’s name
and/or phone number.
LYou have not subscribed to Call Display service.
Contact your telephone service provider to
subscribe.
LIf your unit is connected to any additional
telephone equipment such as a Call Display box
or cordless telephone line jack, disconnect the
unit from the equipment and plug the unit
directly into the wall jack.
LIf your unit is connected to a telephone line with
DSL service, we recommend connecting a noise
filter between the base unit and the telephone
line jack. Contact your DSL provider for details.
LThe name display service may not be available
in some areas. Contact your telephone service
provider for details.
LOther telephone equipment may be interfering
with this unit. Disconnect the other equipment
and try again.
LThe caller requested not to send caller
information (page 20).
LIf a call is being transferred to you, the caller
information is not displayed.
LGenerally, caller information is displayed from
the 2nd ring.
I cannot dial the phone
number edited in the caller
list.
LThe phone number you dialed might have an
incorrectly edited pattern (for example, the long
distance “1” or the area code is missing). Edit
the phone number with another pattern (page
20).
The 2nd caller’s
information is not displayed
during an outside call.
(Visual Call Waiting feature
does not function.)
LIn order to use Call Display, Call Waiting, or
Visual Call Waiting, you must first contact your
telephone service provider and subscribe to the
desired service.
After subscribing, you may need to contact your
telephone service provider again to activate this
specific service, even if you already subscribed
to both Call Display and Visual Call Waiting
services.
TG103xC.bookPage41Wednesday,February28,20075:25PM
To Next Page
Loading...
