(*1) When adding “01” (hex) to default value, sending level
increases by 0.25dB.
ex.)
Item Default Data New Data
3A 3E 36
Sending level -8.0dBm -7.0dBm -9.0dBm
(*2) When reducing “01” (hex) from default value, receiving
level increases by 0.25dB.
ex.)
Item Default Data New Data
14 18 10
Receiving level -21dBm -22dBm -20dBm
Note:
*: When you enter the address, please refer to the table in Note: (P.59) of ENGINEERING MODE.
ex.)
Items (*4) Address Default Data New Data Possible Adjusted
Value MAX (hex)
Possible Adjusted
Value MIN (hex)
Remarks
Sending level 00 06 Adjusted value Given value 6F 00 (*1)
Receiving level 00 07 Adjusted value Given value 00 3F (*2)
Battery Low 00 04 25 - - -
(*3)
Frequency 00 01 75 - - -
ID 00 10~00 14 Given value - - -
(*3) Use these items in a READ-ONLY mode to confirm the contents. Careless rewriting may cause serious damage to the
handset.
(*4)
Items Description
Sending level Analog Front End MIC Setting for Handset Mode
Receiving level Analog Front End LSR Setting for Handset Mode
Battery Low ADC value for battery low detection
Frequency Setting value of FREQ_TRIM_REG
ID International Portable Part Equipment Identities
62
KX-TG1283JXS / KX-TG1283JXT / KX-TCA122CXS / KX-TCA122CXT / KX-TCA121CXS / KX-TCA121CXT
To Next Page
Loading...
