Panasonic KX-TG1283JXS

1. RTL (Retention Time Limited)
Note:
The marking (RTL) indicates that the Retention Time is
limited for this item.
After the discontinuation of this assembly in production,
the item will continue to be available for a specific period
of time. The retention period of availability is dependant
on the type of assembly, and in accordance with the
laws governing part and product retention. After the end
of this period, the assembly will no longer be available.
2. Important safety notice
Components identified by the
mark indicates special
characteristics important for safety. When replacing any of
these components, only use specified manufacture’s parts.
3. The S mark means the part is one of some identical parts.
For that reason, it may be different from the installed part.
4. ISO code (Example: ABS-94HB) of the remarks column
shows quality of the material and a flame resisting grade
about plastics.
5. RESISTORS & CAPACITORS
Unless otherwise specified;
All resistors are in ohms (Ω) K=1000Ω, M=1000kΩ
All capacitors are in MICRO FARADS (µF)P=µµF
*Type & Wattage of Resistor
29.1. Base Unit
29.1.1. Cabinet and Electrical Parts
Ref.
No.
Part No. Part Name & Description Remarks
1 PQGP10286Z1 PANEL, LCD (for KX-TG1283JXS) AS-HB
1 PQGP10286Z2 PANEL, LCD (for KX-TG1283JXT) AS-HB
2 PQHS10675Z TAPE, DOUBLE SIDED (LCD )
3 PQGG10293Z1 GRILLE, FRONT (for KX-
TG1283JXS)
PS-HB
3 PQGG10293Z2 GRILLE, FRONT (for KX-
TG1283JXT)
PS-HB
4 PQBC10429Z1 BUTTON, NAVI KEY (for KX-
TG1283JXS)
ABS-HB
Ref.
No.
Part No. Part Name & Description Remarks
5 PQHR11125Z GUIDE, NAVI KEY BUTTON POM-HB
6 PQBC10430Z1 BUTTON, PLAY ABS-HB
7 PQHR11124Z OPTIC CONDUCTIVE PARTS, LED
LENDS
PS-HB
8 PQSX10291Z KEYBOARD SWITCH, 6 KEY
9 PQBC10431Z1 BUTTON, ANSWER ON ABS-HB
10 PQSX10293Z KEYBOARD SWITCH, TAM KEY (for
KX-TG1283JXS)
10 PQSX10293Y KEYBOARD SWITCH, TAM KEY (for
KX-TG1283JXT)
11 PQSX10292Z KEYBOARD SWITCH, 16 KEY (for
KX-TG1283JXS)
11 PQSX10292Y KEYBOARD SWITCH, 16 KEY (for
KX-TG1283JXT)
12 L0AA04A00028 SPEAKER
13 PQHR11082Z GUIDE, SPEAKER POM-HB
14 PQGG10294Z3 GRILLE, CLEAR (for KX-
TG1283JXS)
PC-HB
14 PQGG10294Z4 GRILLE, CLEAR (for KX-
TG1283JXT)
PC-HB
15 PQKM10685Y1 CABINET BODY (for KX-
TG1283JXS)
PS-HB
15 PQKM10685Y2 CABINET BODY (for KX-
TG1283JXT)
PS-HB
16 PQJT10218Y CHARGE TERMINAL (R)
17 PQJT10219Y CHARGE TERMINAL (L)
18 PQKE10384Z3 HOLDER, CHARGE TERMINAL (R) POM-HB
19 PQKE10385Z3 HOLDER, CHARGE TERMINAL (L) POM-HB
20 PQHR11126Z CASE, CHARGE TERMINAL
21 PQSA10164Z ANTENNA (L)
22 PQSA10165Z ANTENNA (R)
23 PQMG10025Z RUBBER PARTS, MIC
24 PQKF10676Z1 CABINET COVER (for KX-
TG1283JXS)
PS-HB
24 PQKF10676Z2 CABINET COVER (for KX-
TG1283JXT)
PS-HB
25 PQGT18176Z NAME PLATE (for KX-TG1283JXS)
25 PQGT18176X NAME PLATE (for KX-TG1283JXT)
26 PQHA10017Z RUBBER PARTS, LEG CUSHION
27 PQHA10018Z RUBBER PARTS, FOOT CUSHION
29.1.2. Main P.C.Board Parts
Note:
(*1) When replacing IC3 or IC4, data need to be written to
it with PQZZTG1283JX. Refer to Base Unit (P.41) of
THINGS TO DO AFTER REPLACING IC.
Ref.
No.
Part No. Part Name & Description Remarks
PCB1 PQWP11233JXH MAIN P.C.BOARD ASS´Y (RTL)
(ICs)
IC1 C0DBZGE00007 IC
IC3 PQWICD300NEH IC (EEPROM) (*1)
IC4 C1CB00002180 IC (BBIC) (*1)
IC6 PQWI21233JXH IC (FLASH MEMORY)
IC7 C1BB00000265 IC
IC8 PQWI31233JXH IC (FLASH MEMORY)
IC9 C0JBAF000223 IC
IC10 C0JBAF000223 IC
IC11 C0CBAYF00016 IC
(TRANSISTORS)
Q2 B1ADGE000004 TRANSISTOR(SI)
Q3 B1ADGE000004 TRANSISTOR(SI)
Q4 B1ACGP000007 TRANSISTOR(SI)
Q5 PQVTBF822T7 TRANSISTOR(SI)
Q6 B1ABCF000103 TRANSISTOR(SI)
Q7 B1ABCF000103 TRANSISTOR(SI)
Q8 B1AAJC000010 TRANSISTOR(SI)
Q12 B1ABCE000009 TRANSISTOR(SI)
Q361 2SB1218A TRANSISTOR(SI)
Q362 PQVTDTC143E TRANSISTOR(SI) S
29 REPLACEMENT PARTS LIST
72
KX-TG1283JXS / KX-TG1283JXT / KX-TCA122CXS / KX-TCA122CXT / KX-TCA121CXS / KX-TCA121CXT