Panasonic KX-TG5100M - Auto Talk Feature; LCD Contrast

Programmable Settings
20
Auto Talk Feature
The Auto Talk feature allows you to answer a call by lifting the handset off the base
unit or the charger without pressing [] or []. To use this feature, turn the feature
ON. The factory preset is OFF.
• In order to view Caller ID information after you lift up the handset to answer a call,
leave the Auto Talk feature OFF.
LCD Contrast
You can select the LCD contrast (6 levels) on the handset and the base unit
separately. The factory preset is level 3.
1 Press [CONF/FUNCTION].
2 Scroll to “Initial setting” by pressing
[] or [], then press [].
3 Scroll to “Auto talk” by pressing [] or
[], then press [].
4 Select “On” or “Off” by pressing [] or [].
5 Press the soft key ( ), then press [OFF].
1 Handset: Press [CONF/FUNCTION] .
Base unit: Press [FUNCTION/EDIT] .
2 Scroll to “Initial setting” by pressing
[] or [], then press [].
3 Press [] at “LCD contrast”.
4 Select the desired contrast by pressing []
or [].
• The contrast will change.
• The number of steps indicates the contrast level.
5 Handset: Press the soft key ( ), then press [OFF].
Base unit: Press [] (Save), then press [STOP] .
Handset
▼
Initial setting
▼
Auto talk
Auto talk
:Off
SA VE
Handset Base Unit
▼
Initial setting
▼
LCD contrast
LCD contrast
Low High
Ex. Level 6
SA VE
▼