Telephone System
35
Phone Book
For assistance, please call: 1-800-211-PANA(7262)
Selecting characters to enter names
Enter names using the dialing buttons. Press each button until the desired
character is displayed.
• Pressing each button selects a character in the order shown below.
For example, to enter “Tom”:
1. Press [8] four times.
2. Press [6] three times, then press [] to move the
cursor.
3. Press [6] once.
If you make a mistake while entering a name or number
1. Press [] or [] to move the cursor to the incorrect character.
2. Handset: Press [HOLD] (CLEAR) to delete the character.
Base unit: Press [ERASE] to delete the character.
• Each time you press [HOLD] (CLEAR)
or [ERASE], a character is erased.
• To erase all characters, press and hold [HOLD] (CLEAR)
or [ERASE].
3. Enter the correct character.
Keys Characters Keys Characters
[1]
#& ’ () ,– ./1
[6]
mn oMNO6
[2]
abcABC2
[7]
pqr sPQRS7
[3]
de fDEF3
[8]
tuvTUV8
[4]
gh iGHI4
[9]
wxyzWXYZ9
[5]
jklJKL5
[0]
0
Space
[] Moves the cursor to the left.
[] Moves the cursor to the right. (To enter another character using the
same number key, move the cursor to the next space.)
▼
▼
To Next Page
Loading...
