Telephone System
31
Using the Caller List
For assistance, please call: 1-800-211-PANA(7262)
Calling Back from the Caller List
• In some cases, you may have to edit the number before dialing (see below).
(Ex. You may have to delete “1” and the area code.)
• If a phone number is not displayed by Caller ID, you cannot call back that caller
from the Caller List.
Editing the Caller’s Phone Number
You can edit a phone number in the Caller List to call it back or store it in the phone
book.
1 Scroll to the desired caller by pressing [] or [].
2
Handset: Press [], [] or the soft key (
).
Base unit: Press [DIGITAL SP-PHONE].
• The phone number is dialed.
Caller ID Number Auto Edit Feature (p. 32)
This feature allows the unit to edit a Caller ID number into one of 3 patterns
automatically in the Caller List. For details and activation, see page 32.
1 Scroll to the desired caller by pressing
[] or [].
2 Handset: Press the soft key (
).
Base unit: Press [FUNCTION/EDIT].
• Each time you press the soft key ( )
or [FUNCTION/EDIT], the number is
rearranged into one of 3 patterns.
(a)
(b) –
(c) 1– –
• The order in which patterns (a)–(c) are
displayed depends on how the telephone
number is displayed in step 1.
3
To continue with making a call from the Caller List, see this page above.
To continue with storing the number in the phone book, press []
twice.
• If there is no name information, see “Storing Caller List Items in the Phone
Book” on page 33.
Handset Base Unit
DIAL
To Next Page
Loading...
